-
Call Now +44 (0)1274 733 100
-
Any Questions contact@amsystems.co.uk
DIS030 Dewpoint Display
A compact, self-contained, single-channel, 4-digit LED display designed for seamless integration with the range of PDT dewpoint transmitters. Weighing only 125 g, this lightweight display is perfect for direct installation on the transmitter using the secure M12 connector.
The DIS030 display offers ease of use and installation, providing a straightforward solution when local indication is required. With its adjustable design, the display can rotate 270 degrees for better positioning, while the display fascia rotates 360 degrees to accommodate the placement of your dewpoint transmitter. The DIS030 can be user-configured, when ordered, to view readings in °C dewpoint, °F dewpoint, ppm(V) or ppb(V) according to your preferences.
Powered by a 4-20 mA loop, the DIS030 is suitable for continuous measurement when paired with our PDT Dewpoint Transmitter. This plug-in display requires little to no maintenance, ensuring hassle-free operation. For applications demanding additional functionality, consider our DS1200 display for most routine applications or the DS4000 display for more advanced applications requiring a user-configurable display and greater versatility.
Whatever the challenge — Alpha Moisture Systems has you covered.
- Highly customised solutions
- Trusted by industry leaders
- Distributors worldwide
- Over 30 years experience
Versatile trace moisture measurement display
Key features
- Single-channel, 4-digit, LED display
- User-configurable display of dewpoint factory pre-configured to °C or °F dewpoint, ppm(V) or ppb(V)
- Compatible with the PDT dewpoint transmitter for continuous measurement
- 4-20 mA loop powered, requiring little or no maintenance to install or operate
- IP65 ingress protection
- Lightweight design (125 g) for direct installation on the transmitter via M12 connector
- Adjustable display with 270 degree rotation and 360 degree fascia rotation for optimal positioning
Technical Data
General | |
| Sensor/Transmitter Type | Operational with PDT dewpoint transmitter |
| Approvals | CE, UKCA |
| Documentation | Instruction Manual |
Sensor | |
| Dewpoint Range | PDT dewpoint transmitter overall range offered between -60 °C to +50 °C (-76 °F to +122 °F) |
Electrical | |
| Display | 4 Red LED digits |
| Power Supply | 4 – 20 mA, 2 wire loop power |
| Electrical Connection | M12 5 pole DIS030 to PDT M12 5 pole rear connection/cable Two types available. |
Mechanical | |
| Rotating Angle | 270 degrees |
| Dimensions in mm (H x W x D) | 64.77 x 66 x 79.75 |
| Weight | 125 g |
| Operating Temperature | -20 °C - +70 °C |
| Weatherproof Classification | IP65 |
| Mechanical Warranty | 12 Months in case of defective parts or faulty workmanship |
Downloads
What's in the box
DIS030 Display
DIS030 Manual
Applications
AerospaceFor the production of high-specification aeronautical parts, vacuum furnace heat treatment with dry argon is essential, and NADCAP mandates the testing of welding shield gas at the torch head for dryness. Our range of transmitters provides continuous trace moisture measurement, ensuring the feed gas for shielding stays within the required moisture content range, maintaining ideal conditions.
Breathing AirHigh moisture levels in breathing air, as used in diving, firefighting, and defence applications, pose health risks and discomfort. Moisture condensation from high humidity levels in compressed air can lead to blocked airlines or cylinder corrosion, with potentially fatal consequences. Our transmitters allow for the continuous monitoring of trace moisture throughout the pipe network.
Food and BeverageMoisture control is critical in the food and beverage industry to prevent food quality loss. Packaging foods in an atmosphere of dry gases like Nitrogen and carbon dioxide extends shelf life. Our AMT and AMT-Ex transmitters enable continuous trace moisture measurement, reducing waste and carbon footprint.
HDPE ProductionEthylene and propylene, key for manufacturing chemicals and plastics, require precise moisture content monitoring for polymerisation efficiency and catalyst yield. Our range of transmitters ensures process optimisation, product quality, and reduced maintenance costs by providing accurate and consistent trace moisture measurements.
Injection MouldingMoisture adsorbed on plastic pellets can lead to extrusion failures and quality degradation. Our transmitters measure trace moisture in the circulating air to detect possible dryer failures, enhancing process efficiency and reducing costs.
Medical GasesIn medical applications, compressed air and gases must be clean and almost sterile, free from contaminants including water vapour and bacteria. Our AMT and AMT-Ex transmitters offer permanent moisture monitoring in air/gas lines, which is essential for maintaining safe patient care environments.
Natural Gas and LNGThe liquefaction and regasification processes in natural gas supply are crucial for global energy distribution. Moisture presence poses risks of pipeline and valve freezing. Installing the AMT-Ex dewpoint transmitter ensures accurate trace moisture measurement, safeguarding gas quality and system integrity.
PharmaceuticalsIn pharmaceutical manufacturing, accurate moisture determination is crucial for product consistency and quality. Our range of transmitters provides fast, repeatable, and accurate online dewpoint control, essential for the control of blanketing gases.
Power GenerationEnergy production priorities include safety, cleanliness, and efficiency. Our range of online transmitters measures trace moisture, protecting equipment, reducing costs, and improving efficiency in power generation processes.
Welding GasesDifferent welding processes require specific inert gases for atmospheric shielding. Our AMT and AMT-Ex transmitters continuously measure moisture to ensure feed gas used for shielding remains within the specified range, maintaining optimal conditions for welding.
Frequently Asked QuestionsIf you have a question that’s not answered below, please contact us
Is the DIS030 display compatible with all types of Alpha Moisture Systems transmitters?
No, the DIS030 display is specifically designed to work with the PDT Dewpoint Transmitter, forming a complete dewpoint measurement solution which offers easy integration and reliable performance.
What is the ingress protection rating of the DIS030, and what does this mean for its use?
How does the DIS030 display work when connected to the dewpoint transmitter?
Can the DIS030 and PDT dewpoint transmitter be installed in hazardous areas and zones to measure trace moisture in process gases and air?
Can the DIS030 and PDT dewpoint transmitter be installed in an enclosure?
Related products
You might also like...
Whatever the challenge,
you can rely on Alpha
Moisture Systems
If you require a customised trace moisture measurement solution, book a consultation with our expert technical team and find out how you can increase the efficiency and productivity of your operations.
Dewpoint Calculator for Trace Moisture Measurement
in Gases & Compressed Air